KURT VISE

The NEW 6" D-Series Vise with a large 8.8" opening. Look at these innovative features:

Outside rail edges of body are machined. This new edge allows you to indicate alignment during set-up.
Vise nut does not extend beyond the end of the vise body.
D688 has the same footprint as the D675 vise. Distance from keyway to stationary matched.
GrooveLock Jaw (D60-315) and Workstop (WSRL46) standard.
Patented "O" ring pull down feature standard.
Approximately a 20% increase in clamping pressure over D675 vise.

The NEW D688 vise also incorporates all standard D-Series features:

Patented AngLock design
80,000 PSI ductile iron construction.
Bed height matched to size, 2.875" (73.025 mm) within + - .0005". (same as D675 vise).
Long life guaranteed, 10 year warranty
Repeatability within tenths
The Durability and strength of ductile iron.
Sealed needle thrust bearing used at hex end of screw to reduce clamping friction

Ship Wt. 78 lbs.

Machined edge of D688 vise allows precision alignment of vise when used on Angle Plate with sine bar for locating.

$510.00 ea

CLICK HERE FOR THE KURT D675 VISE!

D688 Manual Vise Clamping Force:
Torque Ft. Lbs. 10 20 30 40 50 60 70 80	Lbs. 944 1,875 2,791 3,470 4,499 5,278 5,836 6,665